Multiple struck major mint error coin – No Date India 10 Rupees
- Up for sale is an amazing 10 Rupees Multiple Struck major mint error coin.
- The SKU for this product is: India-EC-MS-0007
- Please see the two photos for the amount of strikes and condition of this amazing 10 Rupees Multiple Struck major mint error coin.
- The obverse of this major mint error coin displays an on-center strike, with additional strikes to the east.
- Most of these additional strikes are off-center and towards the K-3 (clock) position. There are four or more strikes in this region.
- On the obverse, there are devices that show partial impression close to the rim on the east side of the coin at K3 (clock) position. A smooth field area removed some of this device during strikes.
- The multi-strikes elongated the coin slightly to the east from K1 to the K4 (clock) position on this 10 Rupees Multiple Struck major mint error coin.
- The reverse of this Multiple Struck major mint error coin displays a at least four strikes, with additional strikes noted around the “0” (zero) at the western edge of the coin.
- This amazing 10 Rupees Multiple Struck major mint error coin could have received up to 6 or more strikes.
How are Multiple struck major mint error coin made?
- In most cases when a major error coins is being produced, something has gone wrong in or just before the mint press striking chamber. Instead of a nice, neat, orderly line of planchets all behaving and patiently awaiting their turn in the striking chamber of the mint press, something goes wrong over a small period of time. Some of the planchets become upset in the the delivery line to the machine.
- The planchet line can be askew, have planchets piled on top of one another or it could simply look like a major train wreck with planchets scattered everywhere. The minting press is used to being fed planchets on a fairly regular and timely basis. The spacing and timing of each planchet in the striking chamber needs to be perfect in order for everything to be done correctly.
- As the unkempt line of planchets arrive at the striking chamber, and they not orderly, are out of sequence and stacked, the mint press will continue to do its job – striking blank planchets into coins. You can probably envision some of the combination of planchets which may approach the striking chamber when they are not in line. Once these are struck, they may have a better opportunity to be struck more than once since they have escaped the mint’s semi-fool proof technology.
- If there is a “traffic jam” in the area of the striking chamber, things can go amiss very quickly.
- Some of the minting machines appear to be striking coins at a rate of about 2 per second, others perform the striking process at a very high rate of speed. That means it would not take long for a planchet within the striking chamber to take close to a dozen strikes and finally escape the minting press.
Pro Tip: Multiple Struck major mint error coins are not “doubled dies”
- Multiple struck coins are not “doubled dies”. The multiple struck coins received additional individual unintentional strikes from the minting press.
- A doubled die is exactly as the name implies – The die has been doubled with two or more impressions from a master hub (die). This die then has several impressions of the design on this working die, which is then transferred to a coin blank. One strike by the minting press that has a doubled die installed should show the same effects that appear on the die.
- For Multiple struck major mint error coins, the multiple struck coin has received several rapid, strikes in a short period of time from a minting press that has one good impression of the coin design on the dies.
Not a big fan of Multiple struck coins? Take a look at our major mint error coins called Die Caps: Die Cap Major Mint Error Coins (minterrors.org)
Looking for “normal” coins? Please see Shop – US Coins, Silver Bullion and Numismatic products and services – TheCoinStore.org